Timber (HS code ) import patterns

List of catalogs of this article:

• 1,Timber (HS code ) import patterns Car dashboard dismantling method
• 2, The paint on the central console of the car instrument has fallen off. How to repair it?
• 3, The dashboard of the car shows! What does the number mean

car dashboard disassembly method

1. If you want to disassemble it by yourself, you can refer to the following steps: remove the steering wheel. Remove the panel strip at the button above the host. Remove the panel around the host.

2. Disassembly of car dashboardMethod: First, remove the air conditioning control module, use a rubber knife to loosen the cover plate above the central console, remove the cover above the central console, and then use a rubber knife to pry the air outlet at the central console and remove the air outlet. In this way, the entire central control panel will be disassembled, and the disassembly method will be different for different models.

3. The method of disassembly and installation of automobile instrument is to first disassemble the central armrest box, then remove the central air outlet, and then remove the instrument panel: first remove three switches, with bolts behind them, and finally remove the dashboard. The car dashboard is a device that reflects the working status of various systems of the vehicle.

4. The specific method of dismantling the dashboard is as follows: remove the panel strip at the button above the host. Remove the panels around the host. Take out the snap left on the plastic plate of the original car.

5. First of all, as shown in the figure below, insert the warped plate into the gap above the dashboard of SAIC Volkswagen's ordinary Santana to pry the cover plate loose.Next, just remove the cover above the dashboard of SAIC Volkswagen's ordinary Santana car as shown in the figure below, as shown in the figure.

The paint of the central console of the car instrument has fallen off. How to repair it?

There are many ways to repair: you can use a special central control paint spray to repair and remedy the position of the white, which can effectively remove the white place. Use instrument wax to repair, and repair it by repeatedly wiping to restore it to its original appearance, which will not affect the use.

If the paint on the central console is off, wipe it with liquid shoe polish. Because liquid shoe polish can be used to repair the fading of the car central console. However, it should be noted that liquid shoe polish has a certain color difference, and the shoe polish color similar to the color of the central console should be chosen to achieve the best repair effect.

Analysis of how to repair the dashboard: mainly look at the degree of depth, shallow---clean the scratch surface, dry the water, use a fine brush to dip the light paint to fill the scratches, dry (you can also dry it if there is no conditions), carefully flatten it with a paper cutter, and then flatten it with 800# sandpaper, wash and dry it, and finally spray it again. Light paint is fine.

If the scratch area of the leather dashboard is not large, it can be repaired with leather repair agent. If the scratch area is large, it can only be repaired by a professional leather repair factory. Scratch treatment plan for the central control dashboard of the car. First of all, clean the internal plastic plate with a soft wet towel. Then shake the car-specific surface wax well and spray it evenly on the interior plastic panel.

The dashboard of the car shows! What does the number mean

The clutch of the dry dual-clutch transmission is overheated; the oil cut-off system intervenes or fails; the parking sensor fails; the external headlight fails; the engine oil pressure sensor fails; the drive anti-skid system warns or fails. There is an exclamation mark in the middle of the bracket circle.

The dashboard of the car appears (!) It is the alarm light of the brake system. There are the following situations: the friction pad of the brake is seriously worn; the liquid level of the brake fluid is too low;The parking brake has been tightened.

Car (!) If the number lights up, it's a problem with tire pressure. This is the wheel air pressure detection indicator light, indicating that the air pressure of the tire is insufficient. When the air pressure of one of the four tires is too low, the indicator light will light up. The owner needs to check it in time. After solving the problem, the tire pressure detection light will disappear.

1 exclamation mark in the middle of a horizontal bracket. This is a tire pressure monitoring warning light.

It should be the brake warning light. There are several reasons why the brake light is always on: 1. Whether the brake pad is worn to the limit; 2. Whether the brake switch is working normally; 3. Whether the brake bulb is damaged; 4. Whether the brake fluid is missing. I hope it can be helpful to you.

The tire pressure alarm light is on. The tire pressure indicator light is used to show the tire pressure of the vehicle tires, and the color is mainly yellow.Under normal circumstances, the indicator light is turned off. When it is turned on, it may be due to insufficient tire pressure or damage.