Trade data-driven policy analysis

List of contents of this article:

• 1, How to install the boot disk installation system | Detailed steps of the boot disk installation system
• 2, When installing dual systems from win10, how to choose the boot drive
• 3, How to select the correct boot item when using the CD-ROM to install the system
• 4. What is the add boot when installing the system
• 5, How to boot and install the computer system?
• 6
  、Reinstall system select boot drive what to choose

How to install the boot disk installation system | Detailed steps of the boot disk installation system

1. Use WinRAR and Trade data-driven policy analysisother tools to open the system iso image and unzip the gho file to the U disk GHO folder; this is the way to boot and reinstall the system through the USB disk. Everyone is If the system is damaged and cannot be turned on, you can follow this method to reinstall the system from the USB flash drive.

2. Restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS.* The BIOS settings of different motherboards are different. Please refer to the instructions for operation. After the boot system is restarted, the system starts from the system disk, and the installation is normal after booting. Install the system to complete the system installation according to the prompts of the installer.

3. If you need to install a computer system, you can follow the steps below. Insert the system disk into the computer optical drive. Set the preferred boot device to restart the computer, then enter the BIOS and set the system disk as the preferred boot device in the BIOS.

When installing a dual system from win10, select how to select the boot drive

boot partition. According to the official website of the CSDN blog, the boot drive needs to select the boot partition, and the installation drive needs to select the c disk.In a broad sense, the driver refers to the driver hardware that drives a certain type of device, which can actually be installed by professionals during installation.

There is no rigid regulation for installing the system to select the partition (disk character), and usually the first partition (C: disk) is selected. This is just a habit. It is recommended that you also use the C partition to install the system, so that it will be more convenient for system maintenance and installation of other applications later.

The choice of writing method here is USB-HDD+ by default. I also chose it, but some people say that USB-ZIP+ should be chosen. I don't know the specifics, but I can install it successfully according to my choice.

First, we use the USB flash drive to boot into safe mode, and then open the system configuration. Next, you need to switch to the boot tab, as shown in the figure below.Next, you need to check the security boot, as shown in the figure below. Then select the minimum boot, as shown in the figure below.

First, you need to enter the PE system and double-click to run WinNTSetup. Click the second tab, which is the option containing win10.

How to select the correct boot item when using the CD-ROM to install the system

Search for the answer I want to ask a question Baidu knows the prompt information knows that the baby can't find the problem_! The problem may have been invalidated.

Use the ↑↓ arrow key to select the option with CD/DVD and press the Enter key.

Step 1 Prepare the operating system installation CD and check whether the optical drive supports self-starting. If possible, scan all hard disks with the disk scanner to check and fix hard disk errors before running the installer, otherwise it will be troublesome to check for hard disk errors when the installer is running.

What is the add boot when installing the system

1. Boot means the installation of the dual system. Every time it is turned on, the system does not know which system to use, so an option will appear to choose to enter win7 or win8. This is the method of booting and adding booting. For the following reference: First, press Esc/F2 or other keys to enter the Bios interface at 100pm.

2. Adding boots means installing dual systems. Every time it is turned on, the system does not know which system to use, so there will be a choice of win7 or win8, that is, boot. If the computer is not set to start up, it will be stuck at the entrance of the hard disk. If the hard disk has no partition, it will automatically skip the hard disk to find other bootable devices.

3. Explanation: The boot means that the dual system you install, every time you turn it on, the systemI don't know which system you want to use, so an option will appear to let you choose to enter win7 or win8, which is the boot! If you don't guide, you can't enter any system.

4. It is not the default G disk, but your C disk is not an active partition. The system boots should be installed in the active partition. It is recommended to cancel the G disk activity partition. Set the C disk as the main activity partition.

5. If the solid-state drive selects the GPT partition, the boot selects the disk character of the esp partition, which can be seen through the partition tool. It is generally a disk symbol outside disk C. If you want to choose the MBR partition, choose the C disk for booting.

6. The system installation boot disk only refers to the normal installation and boot hardware of Windows (generally CD-ROM). Simply put, that is, the installation CD used by genuine users. You need to enter the BIOS to manually adjust the boot order to enter. Both the boot disk and the installation boot disk can be accessed through the BIOS and the boot menu.

How to boot and install the computer system?

Find First Boot Device, use PgUp or PgDn to turn the page to change HDD-O to CDROM (optical drive startup), press ESC, press F10, press Y, return, save and exit.

First of all, we need to restart the computer, and then press the F12 key to enter the BIOS interface when starting up. Then find the boot order of USBHDD/ID-ROM in the BIOS and set it to the first boot.Item: In the BIOS setting interface, press the F10 key to call up the menu options. After selecting Yes, press Enter to save the exit settings.

First of all, we need to make a usb boot disk, and then set the computer to start from the usb boot to install it. Next, the editor will introduce the method of installing the win7 system on the usb boot disk.

When installing the operating system, the boot item is to select the boot device, that is, the boot CD, hard disk, USB flash drive, etc. Secondly, we need to set the correct boot items in the BIOS. In the BIOS settings, we need to set the startup device to the optical drive, then save and exit.

Reinstall the system and select the boot drive

1. Boot partition.According to the official website of the CSDN blog, the boot drive needs to select the boot partition, and the installation drive needs to select the c disk. In a broad sense, the driver refers to the driver hardware that drives a certain type of device, which can actually be installed by professionals during installation.

2. Since the micro-pe u disk uses the usb disk boot disk to reinstall the system, of course, select the usb disk as the boot.

3. There is no rigid regulation for installing the system to select the partition (disk symbol). Usually, the first partition (C: disk) will be selected. This is just a habit. It is recommended that you also use the C partition to install the system, so that it will be more convenient for system maintenance and installation of other applications later.

4. Select the boot drive in winntsetup boot mode.

5. C disk.Disk C is a system disk that stores the core files and important data of the Windows system and is set as the default system disk character. Winntsetup boot drive selection can ensure compatibility with other system components and protect the security of these files and data.

6. When installing winntsetup WIN7, the boot drive should select the C disk. C disk refers to one of the main partitions of the computer's hard disk, which is generally used to store or install the system. For a single operating system installed on the local hard disk, it is the default local system boot hard disk.