1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
customs transaction analysis-APP, download it now, new users will receive a novice gift pack.
1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
Cross-border HS code harmonization
author: 2024-12-24 03:13How to interpret global trade indicators
author: 2024-12-24 01:54Global trade lead generation tools
author: 2024-12-24 01:44HS code filtering for restricted items
author: 2024-12-24 01:43HS code referencing for port authorities
author: 2024-12-24 00:41HS code-based invoice matching
author: 2024-12-24 03:11How to evaluate supplier reliability
author: 2024-12-24 02:47Pharma active ingredients HS code checks
author: 2024-12-24 02:38HS code-based container load planning
author: 2024-12-24 02:12222.72MB
Check626.74MB
Check356.38MB
Check395.44MB
Check231.14MB
Check325.93MB
Check421.76MB
Check717.46MB
Check881.12MB
Check373.64MB
Check838.66MB
Check821.34MB
Check817.19MB
Check467.17MB
Check966.25MB
Check144.53MB
Check539.55MB
Check742.19MB
Check848.15MB
Check287.25MB
Check948.46MB
Check286.82MB
Check191.36MB
Check696.24MB
Check993.31MB
Check991.94MB
Check257.54MB
Check863.79MB
Check637.51MB
Check386.24MB
Check793.91MB
Check115.65MB
Check381.16MB
Check812.19MB
Check834.53MB
Check512.83MB
CheckScan to install
customs transaction analysis to discover more
Netizen comments More
539 HS code-driven freight route adjustments
2024-12-24 02:54 recommend
2455 How to minimize supply chain disruptions
2024-12-24 01:39 recommend
1475 How to align trade data with marketing
2024-12-24 01:22 recommend
1952 HS code automotive parts mapping
2024-12-24 01:19 recommend
547 How to align trade data with ERP systems
2024-12-24 01:11 recommend