How to meet import health standards

List of contents of this article:

• 1,How to meet import health standards What should I do if the car brakes fail?
• 2, Analysis of the causes of car brake failure
• 3, Causes for car brake failure
• 4, What's wrong with the car brake failure

What should I do if the car brakes fail?

If you can't find a suitable terrain or object to use for a while, you can put one side of the car body close to the mountainside in an emergency, increase the resistance with friction, and gradually reduce the speed. The vehicle should step on the brake whether there is a situation or not when going down a long slope or a steep slope.

The solution to brake failure is: release the accelerator pedal; hang the gear to manual mode, and manually downgrade from high gear to low gear in turn; when pulling the handbrake, you should hold down the brake release button and pull the handbrake continuously, and you can't pull it to death; after the vehicle stops, hang it into the parking gear; you can also look for trees or walls.

After the car's brakes fail, you should stay calm, steady the steering wheel, turn on the double flashing lights, try to step on the brake at the same time, use the low-speed reverse engine to brake at high speed, and continue to downshift.If necessary, use roadside guardrails, trees, rocks, etc. Cause resistance to the driving of the car, so as to achieve the purpose of forced parking and escape. There are many reasons for brake failure.

If the brake fails, you can try to enter the emergency escape channel, where there is sand and gravel to help slow down. Use the engine brake to match the handbrake.

Brake failure on general roads: When driving on general roads, when encountering brake failure, you should first hold the steering wheel tightly, quickly hang the gear to the lower gear, and reduce the speed under the action of engine braking. At the same time, you should also pay attention to the surrounding situation. If conditions permit, strain elimination will bypass the obstacles ahead.

Self-help method for car brake failure during the re-driving process of the car: rn (1) Handbrake cooperates with the engine system rn If the brake failure of the car with manual transmission, release the accelerator pedal as soon as possible.Step on the clutch to downshift to achieve the purpose of generating traction for the engine. Continuous downshifting and handbrake can achieve the purpose of slowing down.

Analysis of the causes of automobile brake failure

Reasons of brake failure: 1. There is a lack of brake fluid in the engine compartment of the vehicle. The brake oil pipe of the vehicle is loose. The brake fluid cup is damaged. The vehicle brake pads are worn too much, the brake calipers are loose, and the brake pedals are stuck or broken. The brake fluid deteriorates. The oil inlet of the brake pump is blocked.

The reason for brake failure is improper operation. Improper operation of the brake in daily driving will lead to mechanical failure. For example, going downhill for a long time will cause friction of the brake pads to generate heat, the brake hub will be carbonized, and the brake function will be completely invalid.

The first reason is the thinning of the thickness due to the wear of the brake pads and brake discs.For example, disc brakes, calipers (also known as brake pads) clamp the brake disc for a long time. After a long time, friction will make the surface of the caliper and brake disc thinner and thinner, which will make the stroke of the brake pedal longer. The second reason is the wear of the tires.

Improper operation. Due to improper operation of the brakes in daily driving, the machine parts fail. For example, going downhill for a long time will cause friction of the brake pads to generate heat, the brake hub will be carbonized, and the brake function will be completely invalid.

If the car's brake fails, the most important consideration is the damage to the car's brake system. The car does not regularly maintain the brake system during daily use. There are too many impurities in the brake master pump, the seal is not tight, the vacuum booster pump fails, the brake fluid is too dirty or missing, etc. These reasons will The brake system has a certain impact.

First of all, let's take a look at the reasons for brake failure: oil leakage, wear, blockage, etc.It occurs in the brake master pump and wheel cylinder. The brake fluid deteriorates or the dirt in the pipeline is too thick. The improper gap between the brake drum and the brake brake tile leads to abnormal movement during braking. These are all problems caused by car failures.

Causes of automobile brake failure

The reasons for automobile brake failure are: lack of necessary maintenance of the brake system, serious overload, improper operation leading to the failure of parts.

There are three reasons for brake failure: the wear of the brake pads and brake discs causes the thickness to become thinner. Tire wear. The main reason is the problem of brake fluid. The first reason is that the wear of the brake pads and brake discs causes the thickness to become thinner.

There are many reasons for the failure of the brake system, such as 1) insufficient brake fluid pressure.

First of all, let's take a look at the reasons for brake failure: oil leakage, wear, blockage, etc. It occurs in the brake master pump and wheel cylinder. The brake fluid deteriorates or the dirt in the pipeline is too thick. The improper gap between the brake drum and the brake brake tile leads to abnormal movement during braking. These are all problems caused by car failures.

If the car's brake fails, the most important consideration is the damage to the car's brake system. The car does not regularly maintain the brake system during daily use. There are too many impurities in the brake master pump, the seal is not tight, the vacuum booster pump fails, the brake fluid is too dirty or missing, etc. These reasons will The brake system has a certain impact.

What's wrong with car brake failure

1. Cause car brakeThe reasons for the failure of the car are: lack of necessary maintenance of the brake system, serious overload, and improper operation leading to the failure of the parts.

2. The reason for brake failure is improper operation. Improper operation of the brake in daily driving will lead to mechanical failure. For example, going downhill for a long time will cause friction of the brake pads to generate heat, the brake hub will be carbonized, and the brake function will be completely invalid.

3. Severe overload: The vehicle is severely overloaded. Under the action of gravitational acceleration, the inertia of the vehicle's movement is increased, which directly leads to brake failure. Improper operation: Due to improper operation, the machine parts will fail. For example, going downhill for a long time will cause brake pad friction to heat, the brake hub will be carbonized, and the brake function will be completely disabled.

4. There are three reasons for brake failure: the wear of the brake pads and brake discs leads to the thinning of the thickness. Tire wear. The main reason is the problem of brake fluid.The first reason is that the wear of the brake pads and brake discs causes the thickness to become thinner.