Download and make an ASUS system recovery CD or USB flash drive.Insert the CD or USB flash drive into the computer and restart it. Enter the BIOS setting interface and set the CD or USB flash drive as the first boot item. Save the settings and restart the computer, and follow the prompts to install the system.
Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When the ASUS computer enters the boot interface, press the F9 key on the keyboard. After that, you will enter the following interface and select the troubleshooting option.Select to recharge this computer on the troubleshooting interface, and pay attention to be divided into important files. After that, the computer can enter the interface of reinstalling the system.
The steps to reinstall the system of this notebook are as follows: After the BIOS of the ASUS notebook is set, the notebook will have a pre-installed system. After entering the system, download the Xiaobai one-click reinstall system tool on Xiaobai's official website. After downloading and double-clicking to run the program, the software will automatically detect whether the ASUS notebook can reinstall the system.
1. It is recommended to try system repair: First, enter the safe mode and remove the recently installed driver/software. 1 Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.
2. Select the control panel to uninstall the recently installed programs and updates in Add and Delete Programs (or Programs and Functions).
3. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
4. Enter the BIOS, modify the hard disk mode, and try to restart after setting different modes to see if it can be started; disassemble the box, unplug the hard disk cable and reconnect it, and then try whether it can be started; pay attention to the boot process and touch the hard disk with your hand to see if it rotates normally;Press Ctrl+Alt+Del to restart the computer.
5. After booting into the BIOS, enter the Secure menu through the arrow keys and select the Secure Boot Menu option at the bottom. Change Secure Boot to Disabled. Press Esc to return to the upper menu, and press the arrow keys to move to the Boot page.
6. Please confirm whether any hardware has been installed/replaced recently, such as hard disk, memory stick, etc. If the card LOGO is installed after installing the memory stick, it is recommended to remove the memory stick first to test whether it is a hardware compatibility problem; if the card LOGO is installed/replaced after the hard disk, please confirm whether the operating system is correctly installed into the new hard disk.
Method 1: Use the recovery partition to restore the system. After shutting down, press the power button, hold down F9 at the same time, and enter the recovery interface. Select "Language" and "Keyboard Input Method" in the recovery interface, and click "Next". Select "Delete Data" and click "Next".
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
The following is heavySteps to install the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. You can press the power-on button for a long time until the machine is out of power, then turn it on and then turn off the power. Repeat 3-5 times until you enter the recovery mode as shown in the figure below. 2 From the selection option screen, click or click to solve the problem
2. The first solution: reinstall the system. If there is a problem with the hardware, you can do it as follows: remove the noteThe battery on the back of this book can only be connected to the computer with a power adapter and try to turn it on. If the power is turned on normally, it is caused by poor battery contact or battery failure.
3. Turn on the computer to start, wait for the boot logo to appear, and then repeatedly press the "Del" key to enter the BIOS settings. Then click "Settings" in the upper left corner of the pop-up interface. Then double-click the "Advanced" option on the right in the pop-up interface.
4. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of the BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
5. The reason why the ASUS laptop cannot enter the system after power-on may be caused by the recent improper shutdown method. The operation method is as follows: press the f8 key continuously after clicking the power-on. Enter the advanced options interface. Use the arrow keys to select and click the last correct configuration option.
6. If the computer system fails, you need to enter the advanced startup interface to set up and solve it. The steps are as follows: First, on your laptop, find the f8 key on the right, and press the f8 key for a long time until the interface appears while turning on the power-on.
*
Import export software solutions-APP, download it now, new users will receive a novice gift pack.
Download and make an ASUS system recovery CD or USB flash drive.Insert the CD or USB flash drive into the computer and restart it. Enter the BIOS setting interface and set the CD or USB flash drive as the first boot item. Save the settings and restart the computer, and follow the prompts to install the system.
Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When the ASUS computer enters the boot interface, press the F9 key on the keyboard. After that, you will enter the following interface and select the troubleshooting option.Select to recharge this computer on the troubleshooting interface, and pay attention to be divided into important files. After that, the computer can enter the interface of reinstalling the system.
The steps to reinstall the system of this notebook are as follows: After the BIOS of the ASUS notebook is set, the notebook will have a pre-installed system. After entering the system, download the Xiaobai one-click reinstall system tool on Xiaobai's official website. After downloading and double-clicking to run the program, the software will automatically detect whether the ASUS notebook can reinstall the system.
1. It is recommended to try system repair: First, enter the safe mode and remove the recently installed driver/software. 1 Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.
2. Select the control panel to uninstall the recently installed programs and updates in Add and Delete Programs (or Programs and Functions).
3. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
4. Enter the BIOS, modify the hard disk mode, and try to restart after setting different modes to see if it can be started; disassemble the box, unplug the hard disk cable and reconnect it, and then try whether it can be started; pay attention to the boot process and touch the hard disk with your hand to see if it rotates normally;Press Ctrl+Alt+Del to restart the computer.
5. After booting into the BIOS, enter the Secure menu through the arrow keys and select the Secure Boot Menu option at the bottom. Change Secure Boot to Disabled. Press Esc to return to the upper menu, and press the arrow keys to move to the Boot page.
6. Please confirm whether any hardware has been installed/replaced recently, such as hard disk, memory stick, etc. If the card LOGO is installed after installing the memory stick, it is recommended to remove the memory stick first to test whether it is a hardware compatibility problem; if the card LOGO is installed/replaced after the hard disk, please confirm whether the operating system is correctly installed into the new hard disk.
Method 1: Use the recovery partition to restore the system. After shutting down, press the power button, hold down F9 at the same time, and enter the recovery interface. Select "Language" and "Keyboard Input Method" in the recovery interface, and click "Next". Select "Delete Data" and click "Next".
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
The following is heavySteps to install the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. You can press the power-on button for a long time until the machine is out of power, then turn it on and then turn off the power. Repeat 3-5 times until you enter the recovery mode as shown in the figure below. 2 From the selection option screen, click or click to solve the problem
2. The first solution: reinstall the system. If there is a problem with the hardware, you can do it as follows: remove the noteThe battery on the back of this book can only be connected to the computer with a power adapter and try to turn it on. If the power is turned on normally, it is caused by poor battery contact or battery failure.
3. Turn on the computer to start, wait for the boot logo to appear, and then repeatedly press the "Del" key to enter the BIOS settings. Then click "Settings" in the upper left corner of the pop-up interface. Then double-click the "Advanced" option on the right in the pop-up interface.
4. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of the BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
5. The reason why the ASUS laptop cannot enter the system after power-on may be caused by the recent improper shutdown method. The operation method is as follows: press the f8 key continuously after clicking the power-on. Enter the advanced options interface. Use the arrow keys to select and click the last correct configuration option.
6. If the computer system fails, you need to enter the advanced startup interface to set up and solve it. The steps are as follows: First, on your laptop, find the f8 key on the right, and press the f8 key for a long time until the interface appears while turning on the power-on.
*
HS code-led regulatory frameworks
author: 2024-12-23 23:49Petroleum products HS code insights
author: 2024-12-23 23:17Global commodity price tracking
author: 2024-12-23 22:40Plastics (HS code ) import analysis
author: 2024-12-23 22:15Global trade data for PESTEL analysis
author: 2024-12-23 22:10HS code-based customs broker RFPs
author: 2024-12-24 00:08Renewable energy equipment HS code mapping
author: 2024-12-23 23:49How to identify top importing countries
author: 2024-12-23 22:32How to identify emerging supply hubsHolistic trade environment mapping
author: 2024-12-23 22:31How to track non-compliance incidents
author: 2024-12-23 22:11184.21MB
Check472.53MB
Check183.27MB
Check445.84MB
Check751.54MB
Check489.55MB
Check991.69MB
Check711.55MB
Check315.14MB
Check499.24MB
Check535.69MB
Check862.18MB
Check742.67MB
Check844.67MB
Check156.42MB
Check544.74MB
Check161.42MB
Check246.31MB
Check119.97MB
Check112.45MB
Check824.41MB
Check261.72MB
Check731.46MB
Check969.12MB
Check465.34MB
Check623.65MB
Check937.32MB
Check143.14MB
Check493.81MB
Check143.62MB
Check316.49MB
Check536.85MB
Check849.84MB
Check576.15MB
Check245.93MB
Check484.26MB
CheckScan to install
Import export software solutions to discover more
Netizen comments More
256 Global trade data
2024-12-23 23:51 recommend
1129 HS code-driven differentiation strategies
2024-12-23 23:33 recommend
1029 customs transaction analysis
2024-12-23 22:28 recommend
2487 Real-time shipment inspection data
2024-12-23 22:12 recommend
1885 Australia import export data visualization
2024-12-23 21:59 recommend