When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
End-to-end shipment tracking solutions-APP, download it now, new users will receive a novice gift pack.
When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
Trade data-driven credit insurance
author: 2024-12-23 20:01HS code-based reclassification services
author: 2024-12-23 19:55HS code-based alternative sourcing strategies
author: 2024-12-23 19:03Real-time trade document filing
author: 2024-12-23 18:44How to interpret complex trade patterns
author: 2024-12-23 18:03How to mitigate currency fluctuation risk
author: 2024-12-23 19:15Paper and pulp HS code insights
author: 2024-12-23 18:42HS code integration into supplier scorecards
author: 2024-12-23 18:38Industry-specific import regulation data
author: 2024-12-23 17:38HS code mapping to non-tariff measures
author: 2024-12-23 17:36266.55MB
Check647.43MB
Check962.66MB
Check739.31MB
Check373.74MB
Check627.81MB
Check791.42MB
Check884.44MB
Check437.18MB
Check295.54MB
Check242.46MB
Check296.95MB
Check715.72MB
Check433.15MB
Check428.77MB
Check569.76MB
Check392.72MB
Check275.89MB
Check331.35MB
Check521.26MB
Check719.39MB
Check564.24MB
Check275.21MB
Check919.51MB
Check838.32MB
Check815.41MB
Check812.14MB
Check782.59MB
Check767.15MB
Check431.38MB
Check343.93MB
Check825.14MB
Check434.46MB
Check789.95MB
Check884.26MB
Check248.95MB
CheckScan to install
End-to-end shipment tracking solutions to discover more
Netizen comments More
2470 HS code monitoring in European supply chains
2024-12-23 20:07 recommend
738 Integrated circuits HS code verification
2024-12-23 19:40 recommend
860 Biofuels HS code classification
2024-12-23 19:00 recommend
2112 Precious metals HS code alignment
2024-12-23 18:28 recommend
168 Cleaning agents HS code classification
2024-12-23 18:12 recommend