After entering the USB disk installation master boot menu, select "0 start Windows_2003PE (old machine)" or "0 start Windows_8" through the up and down keys _x64PE (new machine)" option, which can be selected according to the actual situation of your own machine.
· Key point 1: Set the optical drive as the first startup item in the BIOS.The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
Put the system CD into the optical drive, restart the computer, and move the highlight bar to the CDROM with the arrow key 2) When Press any key to boot from CD appears, press 3) After a moment, the welcome installer interface appears on the screen, select Now Pretend.
The editor of this article will bring you the whole process of reinstalling the xp system.
If the computer configuration used by users is low, it is recommended to install and use the windowsxp system that takes up less resources. The windowsxp system is very good in terms of system interface and system performance. OnlySome users don't know how to install the windowsxp system, so you might as well refer to the following tutorial steps to install the system windowsxp.
One-click recovery disk installation Buy an XP one-click recovery disk can be partitioned during installation. Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.
Select AdVanced BIOS Features option, press Enter to enter the setting program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to CD-ROM to start. Save BIOS settings and return to the main menu to save BIOS settings.
Prepare the installation CD of Windows Simplified Chinese version and follow the steps below to install it. If disk scanning is possible, use the disk scanner to scan all hard disks to check and repair hard disk errors before running the installer, otherwise it will be troublesome to check for hard disk errors when the installer is running.
Select [1] Install the system to the first partition of the hard disk;Go to this interface and perform the system decompression operation; restart automatically after decompression and start reinstalling the windowsxp operating system; restart to enter the windowsxp desktop after reinstalling. Follow the graphic and text steps introduced above to reinstall the windowsxp system with a USB flash drive.
1. First, prepare a USB flash drive with a capacity greater than 1G, and then download the USB disk installation master USB disk boot disk production tool to make it into a USB disk boot disk. To download the GHOST XP system online, you can search by yourself on Baidu. The downloaded format is generally ISO or GHO, and then put it in the GHO folder in the USB flash drive.
2. · Key point one: Set the optical drive as the first startup item in the BIOS. The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
3. Step 2: Select the system installation partition. After starting the system from the optical drive, you will see the Windows XP installation welcome page as shown in Figure 3.According to the screen prompts, press Enter to continue the next installation process.
4. The xp system has been launched for more than ten years, but as a classic operating system, there are still many supporters around the world. How do we use the USB flash drive to install the xp system? In fact, it only takes a few simple steps to complete it. Next, let's talk about the detailed steps and tutorials of the USB flash drive installation xp system. Let's take a look.
Trade data for industrial raw materials-APP, download it now, new users will receive a novice gift pack.
After entering the USB disk installation master boot menu, select "0 start Windows_2003PE (old machine)" or "0 start Windows_8" through the up and down keys _x64PE (new machine)" option, which can be selected according to the actual situation of your own machine.
· Key point 1: Set the optical drive as the first startup item in the BIOS.The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
Put the system CD into the optical drive, restart the computer, and move the highlight bar to the CDROM with the arrow key 2) When Press any key to boot from CD appears, press 3) After a moment, the welcome installer interface appears on the screen, select Now Pretend.
The editor of this article will bring you the whole process of reinstalling the xp system.
If the computer configuration used by users is low, it is recommended to install and use the windowsxp system that takes up less resources. The windowsxp system is very good in terms of system interface and system performance. OnlySome users don't know how to install the windowsxp system, so you might as well refer to the following tutorial steps to install the system windowsxp.
One-click recovery disk installation Buy an XP one-click recovery disk can be partitioned during installation. Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.
Select AdVanced BIOS Features option, press Enter to enter the setting program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to CD-ROM to start. Save BIOS settings and return to the main menu to save BIOS settings.
Prepare the installation CD of Windows Simplified Chinese version and follow the steps below to install it. If disk scanning is possible, use the disk scanner to scan all hard disks to check and repair hard disk errors before running the installer, otherwise it will be troublesome to check for hard disk errors when the installer is running.
Select [1] Install the system to the first partition of the hard disk;Go to this interface and perform the system decompression operation; restart automatically after decompression and start reinstalling the windowsxp operating system; restart to enter the windowsxp desktop after reinstalling. Follow the graphic and text steps introduced above to reinstall the windowsxp system with a USB flash drive.
1. First, prepare a USB flash drive with a capacity greater than 1G, and then download the USB disk installation master USB disk boot disk production tool to make it into a USB disk boot disk. To download the GHOST XP system online, you can search by yourself on Baidu. The downloaded format is generally ISO or GHO, and then put it in the GHO folder in the USB flash drive.
2. · Key point one: Set the optical drive as the first startup item in the BIOS. The method of entering the BIOS varies depending on the BIOS. Generally speaking, pressing the Del key or the F2 key after the power-on self-test is passed.
3. Step 2: Select the system installation partition. After starting the system from the optical drive, you will see the Windows XP installation welcome page as shown in Figure 3.According to the screen prompts, press Enter to continue the next installation process.
4. The xp system has been launched for more than ten years, but as a classic operating system, there are still many supporters around the world. How do we use the USB flash drive to install the xp system? In fact, it only takes a few simple steps to complete it. Next, let's talk about the detailed steps and tutorials of the USB flash drive installation xp system. Let's take a look.
Trade data for government agencies
author: 2024-12-24 00:05Pharma finished goods HS code references
author: 2024-12-23 23:45HS code-based re-exports in free zones
author: 2024-12-23 23:43Trade data for import tariff planning
author: 2024-12-23 23:02How to identify export-ready products
author: 2024-12-23 23:00Automated trade documentation routing
author: 2024-12-24 00:05How to reduce compliance-related delays
author: 2024-12-23 23:34Country of import HS code variations
author: 2024-12-23 22:45How to refine supply chain visibility
author: 2024-12-23 22:44How to implement JIT with global data
author: 2024-12-23 22:41654.59MB
Check321.46MB
Check121.86MB
Check295.24MB
Check411.84MB
Check249.99MB
Check376.62MB
Check332.39MB
Check291.16MB
Check184.59MB
Check968.22MB
Check274.35MB
Check367.32MB
Check195.95MB
Check523.23MB
Check531.69MB
Check684.13MB
Check797.22MB
Check841.77MB
Check326.36MB
Check583.66MB
Check589.86MB
Check933.45MB
Check654.73MB
Check451.19MB
Check911.35MB
Check751.37MB
Check829.42MB
Check883.13MB
Check655.42MB
Check488.83MB
Check419.97MB
Check949.98MB
Check813.76MB
Check838.38MB
Check117.44MB
CheckScan to install
Trade data for industrial raw materials to discover more
Netizen comments More
2206 How to access global trade archives
2024-12-24 00:10 recommend
2319 How to understand INCOTERMS with data
2024-12-23 22:46 recommend
2632 Drilling equipment HS code mapping
2024-12-23 22:26 recommend
1578 Import data for raw commodities
2024-12-23 22:03 recommend
2181 HS code-based broker fee negotiations
2024-12-23 21:58 recommend