HS code-based re-exports in free zones

List of the catalog of this article:

• 1, What are the key points of the villa security monitoring plan?
• 2、 Measures for the construction quality of TV monitoring projects?
• 3, Road monitoring construction plan...
• 4. What are the installation requirements of the security monitoring system
• 5, How to realize the 100-way network camera monitoring scheme?
• 6、 How to write the construction plan of the video surveillance system? Follow the steps of civil construction, pipeline, installation and commissioning_100...

What are the key points of the villa security monitoring plan?

Entrance: Wireless cameras can be installed at the entrance of the villa, such as the gate or front yard. In this way, people and vehicles entering and leaving the villa can be effectively monitored to prevent strangers from entering. Exterior wall: Cameras are installed on the exterior wall of the villa, which can monitor the environment around the villa in an all-round way.

x0dx0a Scheme 1: Economical (this scheme needs to provide computers and monitors) x0dx0a quotation: x0dx0a 16 video surveillance card (hard pressure card), H264 compression format, 16-way video input; 1200 yuan.

The security design of villas should be based on the owner-oriented security needs and humanization. An indispensable part of the design of the villa security system is the video surveillance and alarm system, which is installed in walls, gates, entrance doors and other places.

Measures for the construction quality of TV monitoring projects?

1. TV monitoring project construction quality control strategy 1 Strengthen the management of materials and equipment First of all, construction enterprises should cooperate with the construction unit to do a good job in the brand selection and selection of materials and equipment, and try to choose well-known domestic brands with high cost-effectiveness, not only to achieve reasonable prices, but also to meet Requirements for using functions.

2. In addition, in order to avoid rework caused by construction quality, while strengthening inspection, the rebar acceptance work is decomposed, such as: priori inspection of beam reinforcement, and the binding of plate reinforcement is allowed after qualification.Strict control during acceptance to ensure that the quality of the rebar project meets the required standards.

3. If necessary, the cable should be sampled and tested. Fault solution of monitoring system (III) Failure of the gimbal. A gimbal does not work well or cannot rotate at all shortly after use, which is a common fault of the gimbal.

4. To ensure the quality of the project. Main quality assurance measures and quality common disease prevention and control: be proficient in the operation of construction technicians to achieve continuity and stability, and organize construction according to professionalism. Formulate scientific, strict and specific construction technical plans for the main processes and processes, so as to ensure that there is a handover before construction, inspection during construction, acceptance after completion, and strict three inspection systems.

5. The key processes of the project and the construction process of key parts should be supervised. 5 Strictly implement the system of on-site witness sampling and inspection.

6. Predict in advance, formulate and implement preventive measures, and check the implementation in time. ( 7) Strengthen the monitoring of the construction process. The general process is organized and monitored by the operation captain, and the key process is organized and monitored by the project manager. ( 8) Carry out a quality inspection system for engineering materials, finished products and semi-finished products.

Road monitoring construction plan...

When carrying out the engineering design of the closed-circuit monitoring (CCTV) system, our company follows the customer's basic requirements for the road monitoring system, takes reasonable structure, safety and reliability, mainstream products, low cost and low maintenance as the starting point, and thus provides customers with advanced, safe, reliable, Efficient solutions.

Highway constructionIt has the characteristics of one-time installation. In rural areas, the management of the highway construction site is of great significance. Therefore, before construction, the relevant content should be prepared to ensure that the rural highway construction process has a certain continuity and coordination.

Step 1: We need to determine the distribution of monitoring points. Surveillance cameras are generally installed on street lamp poles, but it does not mean that they are installed on each pole, but we need to calculate and design the spacing of the two surveillance cameras. Only in this way can the best monitoring effect be achieved.

What are the installation requirements of the security monitoring system

1. What are the requirements for the installation of the security monitoring system? The basic equipment selection requirements are first to determine whether to install a monitoring card on the existing computer or on the embedded hard disk recorder. The monitoring host.

2. Install the camera: Install the camera in the selected position as needed. Make sure that the camera can provide clear images and a wide field of view. Connect the camera and monitor: Use the correct type of cable to connect the camera to the monitor. Make sure the connection is stable and test whether the image transmission is normal.

3. When installing the camera, do not use a DC regulated voltage power supply that exceeds the power supply specifications allowed by the camera; indoor camera should not be installed outdoors, so as not to cause damage to the indoor camera; outdoor installation is strictly forbidden to aim the camera at the sun and luminous objects with strong light sources, otherwise it will cause image blur and Produce a halo.

4. Installation angle: mainly divided into two types: cylinder type and hemispherical type. Among them, the cylinder type is relatively common and can be used indoors and outdoors; the hemispherical type is generally used indoors, with a small volume and can be installed on the wall or ceiling.

5. The equipment of the security system is required to be installed in a clean air-conditioned room and installed on the standard rack of 19. There should be an appropriate space between the equipment, and a fan with forced ventilation should be used.

6. When installing a monitoring system, the following 8 monitoring installation principles should be considered first: real-time: real-time monitoring system, which is particularly important. It is also because of the real-time nature of the monitoring system that the monitoring system is so necessary. Security: The monitoring system has security precautions and confidentiality measures to prevent illegal intrusion into the system and illegal operation.

How to realize the 100-way network camera monitoring scheme?

1. Check whether the network connection of the hard disk recorder is smooth and running normally: connect the network cable to the hard disk recorder and turn on the power.

2. First, connect the Haikang hard disk recorder (DVR or NVR) to the external network. If you are a DVR, connect a network cable to the DVR network port at one end and the other to the switch or router that can access the Internet (as long as your computer is connected to this switch and can access the Internet).

3. Vlan needs to be divided. 100-way monitoring, in order to reduce the number of computers in the same network, should not be too large. It is inevitable to divide vlan, so it is necessary to further divide many IP subnets to prevent broadcast storms.

4. [How to realize network monitoring] You can directly monitor the network by means of software, which is convenient and simple. First, search and download "Anqishen Software".

How to write the construction plan of the video surveillance system, according to the steps of civil construction, pipeline, installation and commissioning_100...

1. The first is the preliminary preparation of the project, the second is the verification of management, and the third is the entry of materials and equipment? The fourth outdoor transmission cable. Preparation for the installation of the fifth equipment. Sixth equipment debugging.

2. The construction process of video surveillance is divided into 6 steps. Cable laying → equipment installation → equipment debugging → commissioning into trial operation → completion data collation → acceptance and delivery for use. Cable laying: First determine the number of points and carry out the laying and installation of the cable. Equipment installation: the cable is laid and the probe is installed. Equipment debugging: installation completed, power-on debugging.

3. Before arranging the camera, you should choose the location of the camera installation and choose the right camera according to your own needs.Install the camera in the right position, turn on the camera power, and connect to the network on the camera "Settings" interface. You can also insert a memory card into the camera to record relevant surveillance videos.

4. ◇ The construction of the whole system is carried out in stages according to pre-burying, threading, testing, installation, commissioning, maintenance and other processes. (2) Management directly organized by our project manager department ◇ Strict implementation of the internal economic responsibility system of the project and management according to the contract. ◇ Strict training, assessment, reward and punishment of project participants.