The slower you drive, the safer it is. The speed of the car does affect the safety of driving, but the slower the speed of the car does not mean the safer it is. During the rush hour, the traffic flow reaches its peak. In this case, driving a slow car is simply a disaster. This behavior will not only aggravate congestion, but also easily cause tailgating or other important traffic accidents.
The smaller the deformation of the vehicle, the safer it is. Many vehicles have a large deformation after an impact, such as the front face or rear of the vehicle. This is because the impact force is relieved in the process of deformation after the vehicle is hit, so the driver and passengers in the car can suffer less damage.
Misunderstanding that some car owners always habitually fill up the fuel tank and do not stop when refueling.In fact, too much fuel tank is not conducive to safe driving. Because excess gasoline may overflow, in this case, once it encounters an open fire, it will cause serious consequences and threaten the life of oneself and others.
Among them, downhill idle taxi is a fallacy. This behavior seriously threatens the life and safety of the car owner. All car owners should drive through the downhill section normally according to their usual driving habits, and avoid idling in various road conditions.
1. Passive safety device: airbag, seat belt, safety outlet (automatic) fire extinguishing device, safety glass, child seat, body strength (anti-collision ability), etc. Nowadays, people pay more and more attention to the safety performance of cars, and the safety configuration of cars is also increasing, and the performance is more and more advanced. .
2. Car collision safety is divided into two aspects: active and passive. The so-called passive safety device is a component that plays a buffering and energy-absorbing role when a collision is about to occur, such as bumpers, airbags, seat belts, etc.
3. According to the type of retractor, seat belts can be divided into lockless, manual debugging, self-locking, emergency locking and power-limiting. The main difference is that the retractor is different.
4. ● Volvo's blind spot information system The main safety card has always been Volvo's most important and best field. Therefore, in terms of improving safety design, they also spare no effort to innovate.
5. Completely inelastic collision: Automotive safety design: Completely inelastic collision plays a key role in automotive collision testing and vehicle safety design. In collisions, the vehicle mainly protects passengers by absorbing energy and deformation, so it is necessary to consider the deformation after the collision to improve the safety performance of the vehicle.
Misconception 2: Cars also need to start in second gear and start in second gear. Large trucks and tractors are common, because the main function of these vehicles is heavy transportation, the engine has richer torque, and the second gear starts faster.
The harder the car body, the safer it is. This is a big misunderstanding. Diamonds are the hardest natural substances in the world, but why there are no diamonds as weapons, not because they are expensive, but because they are brittle. The shell of the car is too hard to have a certain cushioning force when it is hit.
The slower the driving, the safer it is. The speed does affect the safety of driving, but the slower the speed does not mean the safer it is. During the rush hour, the traffic flow reaches its peak.In this case, driving a slow car is simply a disaster. This behavior will not only aggravate congestion, but also easily cause tailgating or other important traffic accidents.
But in fact, this is a misunderstanding. Don't forget to cool down. Antifreeze not only plays an antifreeze role in winter, but also cools the engine during driving.
1. From the perspective of ergonomics, the brake pedal and accelerator pedal must have a certain degree of recognition. When stepping on the brake, prevent accidentally stepping on the accelerator to ensure the safety of the people in the car. The brake pedal will be about 20mm higher than the accelerator pedal, which is a little uncomfortable, which plays a role in prompting the driver and preventing the wrong accelerator.
2. Don't keep stepping on the brake when parking: Keep stepping on the brake until the vehicle stops driving will have a relatively large impact in an instant. The skill is to release the brake once before the vehicle stops completely, and then brake gently until the vehicle stops driving.
3. Engine soundproofing cotton is also a topic that everyone is talking about, because you don't need much knowledge to judge. All kinds of sub-factory soundproof cotton are sold overwhelmingly on Taobao, and the quality is uneven.
4. Try not to refuel on thunderstorms, because gasoline is volatile and easy to burn, and a large number of charged particles will be pervasive in the air in thunderstorms. The oil gun is easy to flow charged particles into the car's fuel tank, causing the molecular movement of unstable gasoline to intensify, causing fires, explosions, etc. Safety hazards.
5. In fact, this safety structure is designed for ultra-low-speed collisions.When the speed is slightly higher, the anti-collision beam will have no anti-collision effect. In short, for example, if you accidentally hit the wall when moving the car in the parking lot, this is an ultra-low-speed collision. At most, the paint of the car is scratched. Because the anti-collision beam is on the inside, it will not damage the car body.
6. These life-saving car safety cold knowledge First cold: the brake is higher than the accelerator. In fact, the brake accelerator is not at the same height. In general, the brake is higher than the accelerator. Except for some high-performance cars (sports cars), in order to facilitate the heel movement when braking, the brake is about the same height as the accelerator.
HS code lookup for Asia-Pacific markets-APP, download it now, new users will receive a novice gift pack.
The slower you drive, the safer it is. The speed of the car does affect the safety of driving, but the slower the speed of the car does not mean the safer it is. During the rush hour, the traffic flow reaches its peak. In this case, driving a slow car is simply a disaster. This behavior will not only aggravate congestion, but also easily cause tailgating or other important traffic accidents.
The smaller the deformation of the vehicle, the safer it is. Many vehicles have a large deformation after an impact, such as the front face or rear of the vehicle. This is because the impact force is relieved in the process of deformation after the vehicle is hit, so the driver and passengers in the car can suffer less damage.
Misunderstanding that some car owners always habitually fill up the fuel tank and do not stop when refueling.In fact, too much fuel tank is not conducive to safe driving. Because excess gasoline may overflow, in this case, once it encounters an open fire, it will cause serious consequences and threaten the life of oneself and others.
Among them, downhill idle taxi is a fallacy. This behavior seriously threatens the life and safety of the car owner. All car owners should drive through the downhill section normally according to their usual driving habits, and avoid idling in various road conditions.
1. Passive safety device: airbag, seat belt, safety outlet (automatic) fire extinguishing device, safety glass, child seat, body strength (anti-collision ability), etc. Nowadays, people pay more and more attention to the safety performance of cars, and the safety configuration of cars is also increasing, and the performance is more and more advanced. .
2. Car collision safety is divided into two aspects: active and passive. The so-called passive safety device is a component that plays a buffering and energy-absorbing role when a collision is about to occur, such as bumpers, airbags, seat belts, etc.
3. According to the type of retractor, seat belts can be divided into lockless, manual debugging, self-locking, emergency locking and power-limiting. The main difference is that the retractor is different.
4. ● Volvo's blind spot information system The main safety card has always been Volvo's most important and best field. Therefore, in terms of improving safety design, they also spare no effort to innovate.
5. Completely inelastic collision: Automotive safety design: Completely inelastic collision plays a key role in automotive collision testing and vehicle safety design. In collisions, the vehicle mainly protects passengers by absorbing energy and deformation, so it is necessary to consider the deformation after the collision to improve the safety performance of the vehicle.
Misconception 2: Cars also need to start in second gear and start in second gear. Large trucks and tractors are common, because the main function of these vehicles is heavy transportation, the engine has richer torque, and the second gear starts faster.
The harder the car body, the safer it is. This is a big misunderstanding. Diamonds are the hardest natural substances in the world, but why there are no diamonds as weapons, not because they are expensive, but because they are brittle. The shell of the car is too hard to have a certain cushioning force when it is hit.
The slower the driving, the safer it is. The speed does affect the safety of driving, but the slower the speed does not mean the safer it is. During the rush hour, the traffic flow reaches its peak.In this case, driving a slow car is simply a disaster. This behavior will not only aggravate congestion, but also easily cause tailgating or other important traffic accidents.
But in fact, this is a misunderstanding. Don't forget to cool down. Antifreeze not only plays an antifreeze role in winter, but also cools the engine during driving.
1. From the perspective of ergonomics, the brake pedal and accelerator pedal must have a certain degree of recognition. When stepping on the brake, prevent accidentally stepping on the accelerator to ensure the safety of the people in the car. The brake pedal will be about 20mm higher than the accelerator pedal, which is a little uncomfortable, which plays a role in prompting the driver and preventing the wrong accelerator.
2. Don't keep stepping on the brake when parking: Keep stepping on the brake until the vehicle stops driving will have a relatively large impact in an instant. The skill is to release the brake once before the vehicle stops completely, and then brake gently until the vehicle stops driving.
3. Engine soundproofing cotton is also a topic that everyone is talking about, because you don't need much knowledge to judge. All kinds of sub-factory soundproof cotton are sold overwhelmingly on Taobao, and the quality is uneven.
4. Try not to refuel on thunderstorms, because gasoline is volatile and easy to burn, and a large number of charged particles will be pervasive in the air in thunderstorms. The oil gun is easy to flow charged particles into the car's fuel tank, causing the molecular movement of unstable gasoline to intensify, causing fires, explosions, etc. Safety hazards.
5. In fact, this safety structure is designed for ultra-low-speed collisions.When the speed is slightly higher, the anti-collision beam will have no anti-collision effect. In short, for example, if you accidentally hit the wall when moving the car in the parking lot, this is an ultra-low-speed collision. At most, the paint of the car is scratched. Because the anti-collision beam is on the inside, it will not damage the car body.
6. These life-saving car safety cold knowledge First cold: the brake is higher than the accelerator. In fact, the brake accelerator is not at the same height. In general, the brake is higher than the accelerator. Except for some high-performance cars (sports cars), in order to facilitate the heel movement when braking, the brake is about the same height as the accelerator.
Automated import export risk alerts
author: 2024-12-24 02:33Global trade data normalization
author: 2024-12-24 02:31Heavy machinery parts HS code verification
author: 2024-12-24 00:46Drilling equipment HS code mapping
author: 2024-12-24 00:44Precision machining HS code checks
author: 2024-12-24 02:36How to identify emerging market suppliers
author: 2024-12-24 02:19HS code-based cost modeling for imports
author: 2024-12-24 01:14HS code-based alternative sourcing strategies
author: 2024-12-24 01:00299.14MB
Check686.39MB
Check743.53MB
Check236.24MB
Check243.82MB
Check935.16MB
Check574.78MB
Check721.26MB
Check259.84MB
Check479.23MB
Check882.27MB
Check379.87MB
Check588.79MB
Check927.96MB
Check666.55MB
Check963.61MB
Check389.63MB
Check567.92MB
Check721.94MB
Check386.38MB
Check692.26MB
Check853.81MB
Check683.71MB
Check313.32MB
Check553.86MB
Check249.65MB
Check357.54MB
Check429.42MB
Check438.13MB
Check228.75MB
Check138.81MB
Check628.67MB
Check854.62MB
Check629.69MB
Check239.81MB
Check593.12MB
CheckScan to install
HS code lookup for Asia-Pacific markets to discover more
Netizen comments More
1542 HS code lookup for global trade
2024-12-24 02:13 recommend
1151 How to align trade data with ERP systems
2024-12-24 01:44 recommend
2483 Trade data for industrial raw materials
2024-12-24 01:26 recommend
663 How to use trade data for pricing strategy
2024-12-24 00:46 recommend
1730 Industry-focused market entry reports
2024-12-24 00:33 recommend